This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386
Installation_Totem operator (Sliding gate)
09/21
p.18
(Factory default
≈ 20%
of gate length)
-
Press the programming button (2 times for channel 2, LED
2.2
lights up).
Please note :
If LED
2.1
,
2.3
or
2.4
lights up, continue to press until LED
2.2
is reached.
-
Select another key on the transmitter (different from the pulse mode) and hold it down until
LED
2.2
goes out.
-
Programming for partial opening is complete.
To program additional transmitters for partial opening, repeat the above steps.
Step 1
:
Clear current value.
-
Gate closed,
press and hold down the PROG The programmed partial opening button
of the transmitter, for 2 seconds.
-
The "Light" LED lights up.
-
Release the keys, you hear a confirmation click.
-
The opening recorded value is canceled.
Step 2
:
Program the new desired opening distance.
-
Press the same key (Partial open) on the transmitter, the gate will open.
-
At the desired distance, press the (Partial open) button on the transmitter again, the gate stops.
-
Press the (Partial open) button on the transmitter, the gate closes again and confirms the
opening distance.
To activate this mode :
The pulse mode must be programmed or partial opening.
-
Turn the potentiometer to the right until the desired
delay time.
Please note :
Potentiometer turned to maximum
≈
Timer 5 minutes.
-
Perform a validation cycle to check for proper
operation.
Please note :
If the potentiometer remains on the
value 0
, the gate will remain in
sequential operation for pulse mode
and partial opening.
-
For the installation and programming of the keypad
, see the instructions enclosed
in the accessories package, entitled : 10
-
function wireless keypad connection instructions.
Partial opening
Changing the partial opening distance
Automatic mode
Wireless keypad programming
