This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386
Installation_Totem operator (Sliding gate)
09/21
p.15
Outdoor antenna installation
Step 2 :
Remove the built
-
in antenna on the MASTER control board.
Step 3 :
Wire the outdoor antenna to the MASTER control board.
5 mm
15 mm
-
Strip the outdoor antenna cable.
-
Twist the strands together.
-
Cut off the protruding strands.
-
Connect the outdoor antenna cable :
Shield wire (outer braid)
→
to Mass.
Boundary wire (center wire)
→
to Ant.
Ant.
Mass
Step 1 :
Installing the antenna.
-
Mount the antenna on the bracket, following the mounting order as below.
-
Fix the bracket to the Totem (screws to be adapted, not supplied).
-
Pass the antenna cable through the cap openings in the back.
-
Lower the cable inside the Totem and insert it into the box through the cable glands.
Assembly order
