espresso coffee machines
27
8
9
-
LSI 089 - Rev. 00 - Ed. 04/2015
5.8 ELECTRONIC CONTROL BOARD SETTING
The electronic control board can be set to control two different water level controls (probe or floater) and
to control the two different versions of group delivery (EK or EP).
The electronic control board has a selector for board configuration.
WATER LEVEL CONTROL
According to the type of boiler water level control, it is necessary to set the electronic control board as follows:
• Move the selector to “S” if a PROBE water level control is used (conduction probe).
• Move the selector to “R” if a FLOATER water level control is used (magnetic reed).
GROUP DELIVERY CONTROL
According to the type of group delivery control on the appliance, it is necessary to set the electronic control board as follows:
• Move the selector to “EK” if a 5-selection touchpad is used with programmable doses (automatic version).
• Move the selector to “EP” if a 1-key touchpad is used (semiautomatic version).
Take note!
These settings are made by the manufacturer during the testing phase!
Only after replacing the electronic control board, make sure that the new board is pre-set in for the type of water level and
delivery controls on the appliance.
Содержание S8 Series
