espresso coffee machines
LSC 013 - Rev. 01 - Ed. 05/2014
23
MANUAL FOR USE AND MAINTENANCE
7.1 PROGRAMMING MENU
7.2 PROGRAMMED DOSES
7.3 CONTINUOUS DOSE
Switch on the appliance to enter the programming menu. After the welcome message, press the select button 10 seconds.
Scroll through the menu by turning the select button. When the function to be changed is displayed, press it to enter and
change the parameters.
To exit the programming menu, turn the select button, and when the wording “
EXIT
” appears on the display, press it to
confirm and return to the operating menu.
The appliance has digital dose adjustment.
Scroll through the programming menu by turning the select button. When the dose to be adjusted is displayed, press it to
start programming.
Turn the select button to adjust the time shown on the display. The time will increase when it is turned clockwise and
decrease when it is turned anti-clockwise.
When the required time has been set, press the select button to confirm the value and return to the programming menu.
Proceed with adjusting the next dose.
The software is equipped with three programmable doses. Dose No.3 can be disabled (OFF) by turning the select button
anti-clockwise.
To enable or disable the continuous dose, proceed as follows: scroll through the programming menu by turning the select
button. When the Dose symbol is displayed, continue pressing it to enter.
Turn the select button to enable or disable the function. Then press it to confirm and return to the programming menu.
From the operating menu you can now choose the continuous dose, if enabled.
The appliance can only operate in the continuous dose mode for short periods. Never exceed the time of one minute
continuously in order to prevent the motor from overheating.
Содержание ASTRO
Страница 16: ...espresso coffee machines SERIAL NUMBER...