La San Marco PLUS 5, Техническое руководство по эксплуатации

Страница: 62 / 62

Pag.62
Suggestions:
Use the Test Actuators menu to check all loads of the machine: grinder/s, solenoid valves, contactor and heating element.
Check Alarm History menu, if you find any alarm check and solve the problem.
Test Actuators and Alarm History menu are part of the System Manager menu.
PLEASE NOTE: It is very important to verify that your customers carry out recommended daily cleaning procedures of
brewing unit and milk frother. More parts may be checked depending on your personal experience and also coffee/water
quality.
CONTROL UNIT LEGEND
A) MASTER BOARD
code no. 96.00841 (see electric diagram)
Functions of the fuses:
FU1
value: 4 A 250V. type: D
: fuse for mixer motor 1
FU2
value: 4 A 250V. type: D
: fuse for mixer motor 2
Please Note :
THE OTHER ACTUATORS ARE PROTECTED FROM ELECTRONIC FUSES ( PTC – VDR ).
B) MASTER BOARD LED LEGEND
LED1 LD1 - Vcc : ( red colour) 5 V. DC power supply for microprocessor and electronic component
LED LD2 - VH: ( red colour) 24 V. DC main power supply for master board
LED LD3 - VREG : ( red colour) 12 V. DC power supply for triac and on/off relays
Information for users in the european community
Pursuant to European Directive 2002/96/EC on electrical waste (WEEE), users the Europ-
an community are advised of the following
.

The symbol with the crossed-out dustbin on the appliance or its
packaging indicates that at the end of the product’s life cycle, it
must be collected separately from other waste.

Suitable separate collection of the equipment for the subsequent
recycling, treatment and disposal contributes to preventing possible
negative consequences for the environment and health, and
favours the recycling of materials that the unit is made of.

In accordance with European Directive 2002/96/EC, abusive
disposal of the product by the user will result in application of penalties as set forth by local
law.
The manufacturer reserves the right to change, without prior notice, the specifications of the
equipment illustrated in this publication; the manufacturer declines all responsibility for any
mistakes due to printing and/or typing errors contained in this publication.
All instructions, drawings, tables and information contained in this publication are reserved
and may not be reproduced entirely or in part or be communicated to a third party without
written authorisation from the manufacturer who holds exclusive rights.