Pag.56
13) N° 60 Corrupted data alarm.
Corrupted data alarm 60
This alarm is visualised on display by code 60
First case:
This alarm is visualised during machine functioning
Cause: incorrect operating data in machine memory.
Result: machine shutdown.
Solution: carry out the following controls.
1)
Verify programming data relevant to the operation that is being carried out. They might be varied and therefore the
machine does not recognise the new data.
2)
Carry out “PARAMETERS PRESET” procedure (see chapter system programming configuration data preset).
Second case
: software programming values or data incorrect, data inserted by means of P.C. programming incorrect.
Result: machine shutdown.
Solution:
1)
Carry out “PRESET CONFIGURATION DATA” procedure
2)
Insert new software by means of P.C.
14) N° 63 Clock error.
Clock error 63
This alarm is visualised on display by code 63
Solution: check the following:
a)
run down battery
b)
faulty master board
15) N° 65 Motor block alarm.
Motor block 65
This alarm is visualised on display by code 65
Causes: a mechanical block occurred to the Mixer , Dispenser or Milk pump motors.
Result: the machine is switched OFF.
Check the following:
1)
Mixer motor defective
2)
Dispenser motor defective
3)
Milk pump motor defective
16) N°80 Sim card alarm ( only for machine with GSM Modem kit )
SIM Card error 80
This alarm is visualised on display by code 80
Solution: check the following :
a)
SIM card not inserted into GSM Modem
b)
faulty SIM card.
c)
SIM card not properly inserted.
d)
faulty GSM Modem .
Содержание PLUS 5
Страница 1: ...Pag 1 TECHNICAL INSTRUCTION La San Marco S p a EN ENGLISH cod 7770 046 EDITION October 2009...
Страница 26: ...Pag 26...
Страница 41: ...Pag 41...
