29
english
The display shows
PreBrew. xx sec
yyyyy z.z
where: xx = on or off
zz = total prebrewing on time
yyyyy = espresso, 2 espressos, coffee or 2 coffees
Values from 0.1÷5 in 0.1 sec steps
If you wish to modify the parameter, press the
K1gR1
(+) or
K2gR1
(-) keys to increase or decrease the
value.
Once the prebrewing times have been programmed, press the
K5gR1
key (MENU); to switch to a display for
setting the level sensitivity:
The display shows
ProbeSensivity
xxx
where xxx can be:
low sensitivity
150kΩ
(low)
mid sensitivity
400KΩ
(medium)
high sensitivity
1MΩ
(high)
If you wish to modify the parameter, use the
K1gR1
(+) or
K2gR1
(-) keys.
Once the setting has been made, press the
K5gR1
key (MENU) to switch to a display to choose the function
relating to setting the number of cycles to perform (dispensing allowed)
The display shows
Service Cycles
xxxxx
where xxx can be a number between 0000 and 99000 in steps of 1000
when xxx equals 0000, the function is disabled.
If you wish to modify the parameter, use the
K1gR1
(+) or
K2gR1
(-) keys.
Once the setting has been made, press the
K5gR1
key (MENU) to switch to a display to choose the possibil-
ity of displaying the temperature in degrees Centigrade or in degrees Fahrenheit
The display shows
Temperature
°X
where °X can either be “°C” or “°F”
If you wish to modify the parameter, use the
K1gR1
(+) or
K2gR1
(-) keys.
Once the setting has been made, press the
K5gR1
key (MENU) to switch to a display of the boiler setpoint
temperature setting T°SET.
The display shows
Boiler Temperat.
xxx°C
where xxx is a selectable value of between 80÷125°C in steps of 1°C.
