EN
31
Change of grinding discs
1. Disconnect power supply
from the coffee machine,
stop bean flowing into the
grinder and if necessary
dismantle the grinder.
2. Release clamp [1] and
remove it.
3. Turn stationary discs flange
[3] anti-clockwise and take
it off.
4. Unscrew the grinding discs
(3 screws [4]) from the
stationary- and rotary disc
flanges. Do hold/block the
rotary disc flange [4a] with
a plastic tool.
Cleaning
Use a brush to clean the
surfaces of the flanges.
Remove all coffee particles or
dust from the thread and than
lubraca-te it with slight film
(spray) of Panolin TEF GREASE
H1, prod. 5975, food grade,
NSf listed; www.panolin.com
5. insert new grinding discs
on the cleaned rotary- /
stationary disc flan-ges and
tighten screws carefully.
6. Re-install the statonary
disc flange [5] clock-wise
(avoid touching of the
grinding discs).
7. Connect power supply.
8. Calibrate grinder.
important:
All surfaces of
the grinding discs as well as
the flanges must be properly
cleaned in order to ensure a
perfect grinding.
16. Cleaning Procedure
