La Marzocco A01808, Руководство пользователя

Страница: 7 / 30

EN
7
• 3 stainless steel braided
hoses for water connections;
• 1,5 mt of reinforced plastic
tubing for drainage;
• 1 hose clamp;
• 1 TEE Fitting.
23) If the machine has
been temporarily housed
in settings with a room
temperature of less 0°C/32°F,
the machine must be placed
in a warmer environment in
order to gradually defrost the
hydraulic system prior to use.
24) Water pressure supply
must be between 0,2 and
0,6 MPa.
The maximum inlet water
pressure shall be at least
1,0 MPa (Denmark, Norway,
Sweden).
25) The machine is intended
to be permanently connected
to fixed wiring, and it is
mandatory that a residual
current device (RCD) with
a rated residual operating
current not exceeding 30mA
is installed.
26) This machine is designed
only for preparing coffee and
hot drinks.
27) Any modification to the
equipment is prohibited;
the manufacturer cannot
be held liable for damage
to property, animals, and/
or persons if the equipment
undergoes technical
and aesthetic changes,
changes in performance
and characteristics, and in
general is tampered with in
one or more of its constituent
components.
Water specifications table
Min. Max.
T.D.S. ppm 90 150
Total Hardness ppm 70 100
Total Iron (Fe
+2
/Fe
+3
) ppm 0 0,02
Free Chlorine (Cl
2
) ppm 0 0,05
Total Chlorine (Cl
2
) ppm 0 0,1
pH value 6,5 8,5
Alkalinity ppm 40 80
Chloride (Cl
–
) ppm not more 30
N.B.: Test water quality (the warranty is void if water parameters are not within the range
specified in the section “installation”)