7
3.1
Input AC Connections
Connect AC wiring to the equipment per the image shown below. Refer to section 3.3 for recommended wire
sizes.
3.2 Output
DC
Connections
Connect Ultracap/battery DC cables to the equipment per the image shown below. Refer to section 3.3 for
recommended wire sizes.
Note: Verify that the connections are tight by tugging on the wires.
CAUTION:
When connecting the DC cables to the battery, be certain the positive terminal of the
charger is connected to the positive battery terminal and the negative terminal is connected to the
negative battery terminal
.
Note:
All National and local wiring codes must be followed. Wire insulation must be rated 90C or higher.
Figure 4 – Output Connections
Figure 3 – Input Connections