iii
Unit Location
Allow at least 6 inches of free air on all vented surfaces for proper cooling
Do not operate this unit in a closed-in area or restrict ventilation in any way.
Do not set any battery on top of this unit.
Never allow battery electrolyte to drip on this unit when reading the specific gravity or filling the battery.
Never place this unit directly above a standard flooded battery. Gases from the battery will corrode and
damage equipment.
A sealed maintenance free or valve regulated lead acid (VRLA) battery may be placed below this equipment.
Check for Damages
Prior to unpacking the product, note any damage to the shipping container. Unpack the product and inspect the
exterior of product for damage. If any damage is observed, contact the carrier immediately. Continue the
inspection for any internal damage. In the unlikely event of internal damage, please inform the carrier and
contact La Marche for advice on the risk due to any damage before installing the product. Verify that you have
all the necessary parts per your order for proper assembly.
CAUTION:
Failure to properly file a claim for shipping damages, or provide a copy of the claim to La
Marche, may void warranty service for any physical damages reported for repair.
Returns for Service
Save the original shipping container. If the product needs to be returned for service, it should be packaged in its
original shipping container. If the original container is damaged/unavailable, make sure the product is packed
with at least three inches of shock-absorbing material to prevent shipping damage.
La Marche is not
responsible for damage caused by improper packaging of returned products.
Inspection Checklist
・
Enclosure exterior and interior is not marred or dented.
・
There are no visibly damaged components.
・
All internal components are secure.
・
Printed circuit boards are firmly seated.
・
All hardware and connections are tight.
・
All wire terminations are secure.
・
All items on packing list have been included.
Handling
Use caution handling the unit to prevent damage.
Precautions
●
Do not connect battery and Ultracap in parallel.
●
Do not operate this system in direct sunlight, in contact with fluids, or where there is excessive dust or
humidity.
●
Be sure the air vents on the system are not blocked. Allow adequate space for proper ventilation.
●
Connect the charger AC Mains power cable directly to the distribution panel. Use cables according to
the size of the upstream AC protection panel device.