15
7.
Technical Specifications
AC input
Voltage and frequency
Auto ranging 105-264 VAC, 45-65 Hz
Rated Current
2.6A @120VAC, 1.4A @240VAC (for 24V 10A output mode)
Input protection
AC Fuse (250V, 5A Glass type)
Inrush limiting
Inrush current limited NTC
Efficiency
Exceeds CEC-400-2012-019-CM requirements
Power factor
0.9
Input Terminals
Terminal blocks (Push-In Springable type); AWG 24 - AWG 12
Charger output
Nominal voltage rating
24 volt nominal or field selectable 12/24-volt
Voltage adjustment
According to selected number of cells/ Battery type and
Volt/cell.
Current
10A at 24V and 20A at 12V
Charging characteristic
ULTRACAP Mode
Battery Mode
Line and load
regulation
±0.5%
Output ripple
<100mV rms
Temperature
compensation
Enable/ Disable, Remote temperature sensing through probe.
Output protection
Electronic current limit, Transient protection,
DC fuse (32V, 20A Blade Fuse- Plug-In type)
Output Terminals
Terminal blocks (Lockable type); AWG 24 – AWG 10
Status
indication
LED status indicator
AC ON (Green LED), Float (Green LED), Equalize (Yellow LED),
Fault (Red LED)
Display and
Alarms
Display
LCD Display (16x2)
LCD Dot Matrix Display
Displays volts, amps, Mode of operation and Status messages
Relay Alarm contacts
Charger Fail, AC Fail, Low DC Voltage, High DC Voltage,
Summary
Relay Alarm contact
ratings
Rated 2A @ 30 VDC, 0.5A @ 125VAC
Single form C dry type
Alarm Terminals
Spring Cage; AWG 24 - AWG 16
Environmental
Operating temperature
-40°C to 65°C (-40°F to 149°F)
Storage temperature
-40°C to 85°C (-40°F to 185°F)
Over temperature
protection
Derates over 50C up to 70C
Above 70C, switches off.
Humidity
0% to 95% non-condensing
Physical
Ingress Protection
IP-20; NEMA-1
Dimensions
7.9 x 4.1 x 10.7 in (W x D x H)
801 x 105 x 273 mm (W x D x H)
Weight
6.4 lbs (2.9 Kgs)