La Marche ESCR, Инструкция по установке и эксплуатации

Страница: 3 / 28

ii
Unit Location
 Allow at least 3 inches of free air on all vented surfaces (and external heatsinks) for proper cooling.
 Allow sufficient clearance to open the front panel for servicing.
 Do not operate this unit in a closed-in area or restrict ventilation in any way.
 Do not set any battery on top of this unit.
 Never allow battery electrolyte to drip on this unit when reading the specific gravity or filling the battery.
 Never place this unit directly above a standard flooded battery. Gases from the battery will corrode and
damage equipment.
 A sealed maintenance free or valve regulated lead acid (VRLA) battery may be placed below this equipment.
Check for Damages
Prior to unpacking the product, note any damage to the shipping container. Unpack the product and inspect the
exterior of product for damage. If any damage is observed, contact the carrier immediately. Contact La Marche
for advice on the risk due to any damage before installing the product. Verify that you have all the necessary
parts per your order for proper assembly.
CAUTION: Failure to properly file a claim for shipping damages, or provide a copy of the claim to La
Marche, may void warranty service for any physical damages reported for repair.
Returns for Service
Save the original shipping container. If the product needs to be returned for service, it should be packaged in its
original shipping container. If the original container is damaged/unavailable, make sure the product is packed
with at least three inches of shock-absorbing material to prevent shipping damage.
La Marche is not
responsible for damage caused by improper packaging of returned products.
Inspection Checklist
・
Enclosure exterior is not marred or dented.
・
There are no visibly damaged components.
・
All hardware and connections are tight.
・
All wire terminations are secure.
・
All items on packing list have been included.
Handling
Equipment can be very heavy and/or top heavy. Use adequate manpower or equipment for handling. Until the
equipment is securely mounted, care must be used to prevent the equipment from being accidentally tipped
over.