background image

Model: WS-1025U    www.lacrossetechnology.com/support       

Page | 3

  

 

Slowly

 and firmly pull one end of the mounting bracket from the window. 

Repeat on the other side.  

Note

: The adhesive will not release unless you pull slowly. You may need to 

replace the adhesive tape once the mounting bracket has been removed.

 

 

MAX/MIN Readings 

 

 

The upper display shows the maximum temperature. 

 

The middle display shows the current temperature. 

 

The lower display shows the minimum temperature. 

 

 

The 

minimum

 temperature automatically resets at 

8:00 P.M.

 

 

The 

maximum

 temperature automatically resets at 

8:00 A.M. 

Note

: If the time is not set, the minimum and maximum temperatures will not 

be reset at the correct local time. 

 

Accuracy 

 

Due to heat emission and the protected location of your window, it is possible for 
the temperature displayed to be higher than the outdoor temperature would read 
at another nearby unsheltered location. 

 

Low Battery Indication                                                                                                                                       

 

 

If the LCD appears faint or is not working properly, try a fresh battery before 
contacting customer support. 

 

We recommend that you replace the batteries in all units regularly to ensure 
optimum accuracy of this unit. 

 

Specifications 

 

Measuring range: 

-

13 ºF to +158 ºF (Fahrenheit only)

 

Accuracy: 

 

32 ºF to 122 ºF ± 1.8 ºF, otherwise ± 2.7 ºF 

Resolution: 

 

0.1 ºF (0.1ºF) 

Battery:

  

 

1 “AAA” LR3 alkaline battery (included) 

Receiver:

  

 

4" x 3.75" x 0.75"

 

 

Care and Maintenance 

  

 

Do not mix old and new batteries

 

 

Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

 

 

Always purchase the correct size and grade of battery most suitable for the intended 
use. 

 

Replace all batteries of a set at the same time. 

 

Clean the battery contacts and also those of the device prior to battery installation. 

 

Ensure the batteries are installed correctly with regard to polarity (+and -). 

 

Remove batteries from equipment with is not to be used for an extended period of 
time. 

 

Remove used batteries promptly. 

 

Do not expose to extreme temperature, vibration or shock.  

 

Clean with a soft damp cloth. Do not use solvents. 

 

The product is not a toy. Keep it out of reach of children. 

 

The product is not to be used for medical purpose or for public information. It is 
intended for home use only. 

Содержание WS-1025U

Страница 1: ...inal The display will become active Step 4 Replace the battery compartment door Step 5 Remove the protective film from the display of the thermometer Step 6 Set time required so MIN MAX temperature resets correctly Restart If the display does not become active remove the battery and check that the entire plastic tab was removed Reinsert the battery Mounting Bracket Adhesive Strips for Window Mount...

Страница 2: ...of dust and dirt and let the area dry completely prior to mounting the thermometer Failure to do so may result in bad adhesion between the window and mounting bracket 4 Practice placing the mounting bracket level on the window before removing plastic from adhesive strips It is difficult to remove the mounting bracket once attached to the window 5 Remove the plastic from the adhesive strips 6 Press...

Страница 3: ...ry a fresh battery before contacting customer support We recommend that you replace the batteries in all units regularly to ensure optimum accuracy of this unit Specifications Measuring range 13 ºF to 158 ºF Fahrenheit only Accuracy 32 ºF to 122 ºF 1 8 ºF otherwise 2 7 ºF Resolution 0 1 ºF 0 1ºF Battery 1 AAA LR3 alkaline battery included Receiver 4 x 3 75 x 0 75 Care and Maintenance Do not mix ol...

Страница 4: ...installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a c...

Отзывы: