La Crosse WM9280 Meteotime, Руководство пользователя

Страница: 8 / 42

In the event the Meteotime icon changes to , that means there are potential sources of interference next unit. The
sources of interference may come from the electronics equipment such as TV-set, computers, household machines
etc. It may also be due to lots of concrete, metal parts and electrical equipment in the building. It may also be due to
your living area if it is very far away from the radio-controlled clock tower.
By the first time you power up this product, the language default setting is in German language. In order to change it
into another language such as English, Spanish, French, Italian, Dutch, or Swedish, please follow the setup as below.
When you insert batteries for the first time, wait until the main unit receives:
• “ SUCHE SIG. “ (means “Searching for Signal”) will show in the information window.
• After several seconds, “ LAND EINST” (means “Country”) will show in the information window.
• Press [SET] and “ ZONE +00 H “ is shown in the information window.
• Now press [ SET ] again and “ LANGUAGE “ will be shown in the information window, then press [
▲
] or [
▼
] to select
your desired language. There are seven languages, namely German, English, Spanish, French, Italian, Dutch &
Swedish.
• Press [SET] two times to exit the setup. If you skip the above-mentioned step, the information window will show the
default city “FRANKFURT.M”. You can change to your desired language in the following steps :
• Press and hold [SET] for 3 seconds, (“LAND EINST “means “Country”) is shown in the information window.
• Press [SET] again and “ZONE +00 H “ is shown in the information window.
• Press [SET] again and “LANGUAGE “ will be shown in the information window. Press [
▲
] or [
▼
] to select your desired
language. There are seven languages to select, namely German, English, Spanish, French, Italian, Dutch & Swedish.
• Press [SET] two times to exit the setup.
1.3 OPERATION INSTRUCTION
You are able to use the TEST function to look for a better location
• Press [TEST] button, “ SCAN “ is shown in the information window.
• Pick the unit to find a good location.
• flashing : The test is running and the Meteotime signal reception is good. You are able to leave the device in this
position.
flashing : The test is running and the Meteotime signal reception is poor. You need to keep on looking for a
better location.
• The test lasted for around 1 minute. You can restart the test with the [TEST] key at any time and also discontinue the
test by press the [TEST] key.