La Crosse WM9280 Meteotime, Руководство пользователя

Страница: 30 / 42

2.5 SETTING PRESSURE PARAMETERS DURING INITIAL START-UP
This part of the display indicates the current pressure, sea level pressure and moon phase. A number of historical
statistics can also be viewed, such as the sea-level pressure values for the last 24 hours, moon phase for the previous
and next 39 days, as well as a pressure/temperature/ humidity history bar-chart.
Pressure values may be displayed inHg, hPa/mBar or mmHg, and altitude values may be displayed in meters or feet.
ACCESSING PRESSURE AND WEATHER FORECAST MODE
From the main console unit, press [ ▲ ] or [ ▼ ] until the weather forecast icon starts flashing.
SETTING PRESSURE PARAMETERS DURING INITIAL START-UP
During the initial start-up of the main unit, the pressure settings should be configured in following steps.
1. Choose pressure units:
The unit icon “inHg” or “mmHg” or “hPa/mBar” should be flashing. Use [ ▲ ] or [ ▼ ] keys to select pressure unit as inHg,
hPa/mBar or mmHg. Press [SET] to confirm your selection.
2. Choose altitude units:
Press [ ▲ ] or [ ▼ ] to select altitude unit as feet or meters. Press [SET] to confirm your selection.
3. Set altitude:
Use [ ▲ ] or [ ▼ ] keys to adjust value. Press and hold either button for fast advance. Press [SET] to confirm your selection.
4. Upon completion the display will be returned to “Pressure and Weather Forecast” mode.
Note: After initial start-up the altitude cannot be adjusted immediately.
VIEWING PRESSURE AND ALTITUDE DATA
In Pressure Mode, each press of [SET] rotates display between:
• Sea level pressure
• Local pressure
• Local altitude
SETTING THE SEA LEVEL PRESSURE
1. In Pressure Mode, press [SET] until the sea level pressure is displayed.
2. Press and hold [SET], the sea level pressure display should be flashing.
3. Set sea level pressure:
[ ▲ ] or [ ▼ ] to adjust value. Press and hold either button for fast advance. Press [SET] to confirm your selection.
4. Upon completion the display will be returned to “Pressure and Weather Forecast” Mode.