La Crosse Technology, Ltd
Page 5
With the Alarm time showing, press and release the ALARM button to activate the alarm. The alarm
icon (bell) appears when alarm is active.
DEACTIVATE:
With the Alarm time showing, press and release the ALARM button to deactivate the alarm. The
alarm icon will disappear when alarm is inactive.
Note:
When the alarm sounds, it will continue for two minutes then shut off.
Snooze Alarm
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 10 minutes.
The snooze icon
Zz
will flash when the snooze feature is active.
To stop alarm for one day, press ALARM button, while in snooze mode.
The alarm icon (bell) will remain solid.
USB Charge Port
Explanation:
The alarm clock has an integrated USB charging port (on back) that will charge a device
when the alarm clock is operated on AC power.
Note:
This is a power-output charging port. It does not supply power to the projection alarm.
Connect your external device’s USB charging cable (not included) to the USB charging port.
Charging times will vary.
USB Power Output: 1.0A maximum current
Charge 1.0A devices or devices that are self-regulating
Note:
Some USB cables are for data transfer only and cannot be used for charging. Make sure that the
USB cable you use will charge your device. Most USB cables included with mobile devices will work for
charging.
Note:
Many devices may require more power to charge than provided by this alarm clock.
Moon phase is incorrect.
The moon phase is programmed to the Gregorian calendar rather than the lunar calendar.
The moon phase may be off a few days from the moon phase seen on the Internet.
Atomic Alarm Clock is dim
Explanation:
When operating on AC power, the HI/LOW/OFF button can dim the backlight or turn it off.
Press the HI/LOW/OFF button a few times to bring the backlight on bright.
Check the AC cord connection.
If operating on battery power only, the backlight will only come on for 10 seconds.
Atomic Alarm Clock has distorted or frozen display
Explanation:
On a brand new alarm clock, check for thin plastic film of
printed scratch guard
that may
be on the screen of the alarm clock. This thin piece of plastic has printed numbers for store displays.
When the batteries are installed, the “real” numbers show behind the printed scratch guard and create
distortion.
With all power removed, the alarm clock should be blank.
If numbers still appear, please check for scratch guard.
Power:
Check that the batteries and AC cord are installed correctly.
This is generally a power related issue.
Batteries
may be overpowered or underpowered.
Remove batteries from alarm clock.
Press any button 20 times. Leave the batteries out of the display for 2 hours.
Insert AC cord and batteries into the alarm clock.
Atomic Alarm Clock is blank: No letters, numbers or dashed lines
Check that the batteries and AC cord are installed correctly.
Batteries
may be overpowered or underpowered.
