6
III. PROGRAM MODE
To enter the Program Mode hold down the “SET” button for 1 second, until the time
zone (“-5” default) flashes in the lower left. The Program Mode Guide is laid out in
a manner that allows you to program each function separately, or you can follow the
instructions entirely to program the Projection alarm. Complete programming is
usually done for the initial set-up, and will require you to skip step 1 of
programming sections III through VIII. Press the “SNOOZE” button at any time to
exit the Program Mode, or wait approximately 15 seconds for the Projection Alarm
to automatically return to normal operation.
A. PROGRAMMING
SEQUENCE
1. Time Zone Setting
2. Daylight Saving Time ON/OFF
3. Adjustable
Snooze
4. Hour
Setting
5. Minute
Setting
6. Year
Setting
7. Month
Setting
8. Date
Setting
9. Day
Setting
10. 12/24-hour Mode
B. FUNCTION
BUTTONS
There are 7 function buttons
located on the front of the
Projection Alarm and one on the
top. The function buttons are
labeled:
ALM1/HOUR
,
ALM2/MIN
, light intensity icon,
DISPL
, light direction icon,
SET
,
MODE/+
, and
SNOOZE (the top
bar).
C. TIME
ZONE
SETTING
1. Hold down the “
SET”
button for 1 second, the time zone (“-5” default) will
flash in the Date LCD.
2. Press the “+” button to select the appropriate time zone. There are 13 time
zones to choose from (based relative to the international time standard of
GMT (“Greenwich Mean Time).
PROJECTION
02'(
