2.
ACTIVATING/DEACTIVATING THE ALARM
a. After entering the alarm setting mode, the alarm is activated (either
ALM1 or ALM2).
12
b. To toggle between activating and
deactivating the alarm, press either
the ALM1 or ALM2 briefly.
“(((1)))” or “(((2)))” will be
displayed to the right of the time
display when the alarm is activated.
c. When the snooze bar is pressed, the
display will scroll through the
Alarm 1 and 2 times in the lower left.
Alarm 2 activated
3.
TURNING ALARM OFF (WHILE SOUNDING)
a. While either alarm is sounding, press the SNOOZE bar to disable the
alarm for the set duration (Section II. D.). If the duration is set to “0”,
the alarm will be disabled for 24 hours.
b. After the SNOOZE bar is pressed, the lower left will display the time
remaining on the snooze. The SNOOZE bar may be pressed at any time
to restart the snooze duration.
c. To disable the alarm for 24 hours, press any button other than
SNOOZE or projection keys.
H. CHANGING DISPLAY MODE (DAY, SECONDS, AND
TEMPERATURE)
There are six possible display modes to view the day, seconds, and temperature
(remote temperature is constantly displayed). To change the display (starting at
the default of Day.Date.Year/Remote Temperature):
1. Press the “MODE/+” button. The display should now show
month.day.year/remote temperature
2. Press the “+” button a second time and the display will now show
seconds/remote temperature
3. Press the “+” button a second time and the display will now show
alarm1 time/remote temperature
4. Press the “+” button a second time and the display will now show
alarm2 time/remote temperature
5. Press the “+” button a second time and the display will now show
indoor temperature/remote temperature
6. Press the “+” button a second time and the display will now show
day.month.date/remote temperature
