background image

 
 

16

WARRANTY INFORMATION 
 

La Crosse Technology provides a 1-year warranty on this Projection alarm.  Contact 
La Crosse Technology immediately upon discovery of any defects covered by this 
warranty. 
 
Before sending the Projection alarm in for repairs, contact La Crosse Technology.  The 
Projection alarm will be repaired or replaced with the same or similar model. 
This warranty does not cover any defects resulting from improper use, unauthorized 
repairs, faulty batteries, or the Clocks inability to receive a signal due to any source of 
interference. 
 
LA CROSSE TECHNOLOGY WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED 
WITH THE OPERATION OR MALFUNCTION OF THIS PROJECTION ALARM.  
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR 
PUBLIC INFORMATION.  THIS PRODUCT IS NOT A TOY.  KEEP OUT OF 
CHILDRENS’ REACH. 
This warranty gives you specific legal rights.  You may also have other rights specific to 
your State.  Some States do not allow the exclusion of consequential or incidental 
damages; therefore the above exclusion of limitation may not apply to you. 
For warranty work, technical support, or information contact: 

 

La Crosse Technology 

190 Main Street 

La Crescent, MN 55947 

Phone: 507.895.7095 

Fax: 507.895.8000 

e-mail: [email protected] 

web: www.lacrossetechnology.com 

 
 
 
 
 

FCC ID: OMO-01RX (receiver) 

OMO-01TX (transmitter) 

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.  
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 
1.  THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 
2.  THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING 
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 
 

Содержание WT-5721

















Отзывы: