6
a search is automatically conducted nightly at midnight. If the signal is found at
midnight the tower icon will remain. If the signal is not found another search
will take place every hour, until 6:00 am, until the signal is found successfully.
If no signal is found during this period the tower icon will not appear and the
clock will search again at 12:00 am the next night.
II.
Program Mode
To enter the program mode, hold down the “SET” button for 1 second until the time
zone, “-5” which is the default setting, flashes in the lower left. Press and release
the “SNOOZE” button at any time to exit the program mode or wait approximately
15 seconds for the projection alarm to automatically return to normal operation.
A.
Programming Sequence
1.
Time Zone Setting
2.
Daylight Saving Time ON/OFF
3.
Adjustable Snooze
4.
Hour Setting
5.
Minute Setting
6.
Year Setting
7.
Month Setting
8.
Date Setting
9.
Day Setting
10.
12/24-hour Mode
B.
Function Buttons
There are 7 function buttons located on the front of the
projection
alarm
and one
on the top. The function buttons are labeled:
“ALM1/HOUR”
,
“ALM2/MIN”
,
light intensity icon,
“DISPL”
, light direction icon,
“SET”
,
“MODE/+”
, and
“SNOOZE” (the top bar).
C.
Time Zone Setting
1.
Hold down the
“SET”
button for 1 second.
2.
The time zone (“-5” default) will flash in the Date LCD.
3.
Press and release the “+” button to select the appropriate time zone.
There are 13 time zones to choose from (based relative to the international time
standard of GMT (“Greenwich Mean Time).
