6
SETTING UP:
When one transmitter is to be used
1.
First, insert the batteries to the transmitter (see “
How to install and replace
batteries in the Thermo-hygro transmitter
”
below).
2.
Within 2 minutes of powering up the transmitter, insert the batteries to the
Temperature Station (see “
How to install and replace batteries in the
Temperature station
”
below). Once the batteries are in place, all segments of the
LCD will light up briefly. Following the indoor temperature and the time as 12:00 will
be displayed. If they are not shown in LCD after 60 seconds, remove the batteries
and wait for at least 60 seconds before reinserting them. Once the indoor data is
displayed user may proceed to the next step.
3.
After the batteries are inserted, the Temperature Station will start receiving data
signal from the transmitter. The outdoor temperature and humidity should then be
