11
HOW TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO
TRANSMITTER
The Thermo-hygro transmitter uses 1 x CR2032, 3.0V Lithium battery.
When the battery needs to be replaced, the low battery icon will
appear on the LCD of the Temperature Station. To install and replace
the batteries, please follow the steps below:
1.
Unload the battery holder at the bottom of the transmitter.
2.
Insert the battery, observing the correct polarity (see marking).
3.
Replace the battery holder to the unit.
Note:
In the event of changing batteries in any of the units,
all
units need to
be reset by following the setup procedures. This is because a random