11
Icons
flashing
The temperature display can be selected to show temperature data in °F or °C (Default °F).
1.
Use the CH/+ key to toggle between “°F” or “°C”.
2.
Confirm with the SET key and enter the
Weather forecasting icon sensitivity setting
.
WEATHER FORECASTING ICON SENSITIVITY SETTING:
For locations with rapid changes of weather conditions, the weather icons can be set to a different level for
faster display of weather conditions.
1.
The current sensitivity value will start flashing.
2.
Use the CH/+ key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1
is the most sensitive setting; level 3 is the slowest recording setting (default setting is "2").
3.
Confirm with the SET key and exit the
Manual settings
.
ALARM SETTING:
The alarm time can be set when pressing the ALARM 1 or ALARM 2 key.
1.
Press the ALARM 1 or ALARM 2 key until the alarm digits flash.
2.
Use the HOUR/IN key to set the alarm hour.
3.
Use the MIN/OUT key to set the alarm minute.
4.
Confirm with the ALARM 1, ALARM 2, or Snooze key and exit the
Alarm setting
.
Note:
The maximum alarm ring duration is 2 minutes
.
The alarm setting can be activated or deactivated manually
by pressing the ALARM 1 or ALARM 2 key, depending on which one is activated. The alarm icon will be
displayed on the LCD if the setting is activated.
SNOOZE ACTIVATION AND STOPPING THE ALARM:
The snooze function can be activated when the alarm is ringing by pressing the SNOOZE key. However the
snooze will only be activated when the snooze time is set other than OFF in snooze setting.
Otherwise the snooze function will not be activated.
When the alarm is snoozing, the alarm icon ((1)) or ((2)) will start flashing indicating that the alarm is active
but is in Snooze mode. To stop the snooze function when it is in snooze period, press and hold the
SNOOZE key for 2 seconds until a “Beep” is sounded. You can also press the HOUR/IN or MIN/OUT keys
once to stop the snooze function.
Alarm icons
Alarm time
Digit
flashing
