20
B.
Mounting the WS-7394U Indoor Weather Station
The indoor weather station can be mounted in two ways:
•
with the table stand
•
on the wall with the use of a wall hanging screw (not included)
1.
USING THE TABLE STAND
The indoor weather station comes with the table stand
already mounted. If you wish to use the table-stand all
that is required is to place the indoor weather station in an
appropriate location.
2.
WALL MOUNTING
a.
Remove the table-stand. To do this, pull down on the
stand from the rear and rotate forward.
b.
Fix a screw (not included) into the desired wall,
leaving approximately 3/16 of an inch (5mm)
extended from the wall.
c.
Place the indoor weather station onto the screw using
the hanging hole on the backside.
d.
Gently pull the indoor weather station down to lock
the screw into place.
Maintenance and Care Instructions
A.
Extreme temperatures, vibration, and shock should be avoided to
prevent damage to the units.
B.
Clean displays and units with a soft, damp cloth. Do not use solvents
or scouring agents; they may mark the displays and casings.
C.
Do not submerge in water.
D.
Immediately remove all low powered batteries to avoid leakage and
damage.
E.
Opening the casings invalidates the warranty. Do not try to repair the
unit. Contact La Crosse Technology for repairs.
