6
Rain Window
The weather station records the total amount of the rainfall for:
•
Last hour
•
24 hours
•
Past day
•
Past week
•
Past month
The rainfall can be displayed in inches or mm. There is a daily
rainfall alert that can be programmed.
Rain Statistics
View:
With the
rain icon
flashing Press either SET or MEMORY button to recall a rain statistics for the past hour, past 24 hours,
yesterday, past week or past month.
Note:
Last Hour rainfall value is displayed as a rate of rain in either “inch/hr.” or “mm/hr.”
Reset:
With the rain icon flashing, press and hold the MEMORY button to reset all rainfall statistics.
Setting Rain Display; inches or mm
•
With the rain icon flashing, press and hold the
SET
button to toggle rainfall units of measure between mm and inches.
24 hour Rainfall Alert
Set Daily Rainfall Alert
1.
With the rain icon flashing, press ALARM/CHART button to display the rainfall alert.
2.
Hold ALARM/CHART button until the rainfall alert ALARM HI will flash.
3.
Set the desired value for the Rainfall Alert by using UP or DOWN arrow button. Press and hold either button for fast digits advance.
Alert Off
1.
With the rain icon flashing, press the ALARM/CHART button to display either the current rainfall statistics or the daily rainfall alert with
ALARM HI displayed.
2.
Press the UP or DOWN arrow button to enable or disable it.
3.
If the alert is disabled, the OFF will be displayed.
4.
Press ALARM/CHART
button to confirm selection and the weather station will return to the rainfall alert display.
Wind Window
Wind direction is shown by compass points (i.e. NW) or in bearings starting from north (i.e. 22.5º).
The weather station records the maximum wind speed and gusts collected during the day. Wind speed and gust alerts can be
programmed.
•
Wind sensor temperature or wind chill are selectable
•
Average wind speed (over the past 10 minutes) is displayed
•
Wind Gust
Wind Display
1.
Press the UP or DOWN button until the
wind icon
on the display flashes.
2.
Press and release the SET
button to alternate between:
•
Wind chill with direction in bearings
•
Wind chill with direction in compass points
•
Wind sensor temperature & wind direction in compass points
•
Wind sensor temperature and wind direction in bearings
Select Wind Speed in km/h, mph, m/s or knots
With the wind icon flashing, hold the SET
button to set the wind speed units in:
•
km/h (kilometers per hour)
•
mph (miles per hour)
•
m/s (meters per second)
•
knots
Wind MAX/MIN
View:
With the wind icon flashing, press and release the MEMORY button to view:
•
Current wind speed
•
Daily maximum wind speed
•
Gust speed
•
Daily maximum gust speed
Reset:
With the wind icon flashing, hold the MEMORY button to reset all wind statistics.
Set Wind Alerts
The weather station will allow you to set
Wind Speed Hi alert
and
Wind Gust Hi alert.
