13
Press and hold for 3 seconds to reset the maximum/ minimum temperature and
humidity records of indoor and the currently selected outdoor channel at the same
time (will reset all records to current level).
Stop the alarm
Switch on the backlight
MIN/ MAX
This key is used to:
Toggle between the maximum/ minimum outdoor temperature and maximum/
minimum indoor temperature and humidity data
Note:
The Time/date shown is corresponding to MIN/MAX temperature data.
Stop the alarm
Switch on the backlight
ALM key (alarm)
This key is used to:
Press for about 3 seconds to enter the Alarm set mode
Activate/ deactivate the alarm
Stop the alarm
Switch on the backlight
14
CH/ + key
This key is used to:
Toggle between the Outdoor transmitters 1, 2 and 3 (if more than 1 transmitter is
used)
Adjust LCD contrast, time zone, Time Reception ON/OFF, 12/24 hour display, hour,
minute, year, month, day, snooze time duration, °F/°C and weather forecasting icon
sensitivity in setting modes
Adjust the alarm time in alarm setting mode
Stop the alarm
Switch on the backlight
SNOOZE/ SUN key
This key is used to:
Activate the snooze function for the alarm
Toggle between the sunrise time, sunset time, sun duration in the Sun display
Exit manual setting mode and alarm setting mode
Switch on the backlight
LCD SCREEN AND SETTINGS:
The LCD screen is split into 5 sections displaying the information for time, date, weather
forecast, indoors and outdoors.
15
*When the signal from the transmitter is successfully received by the Temperature Station,
this icon will be switched on. (If not successful, the icon will not be shown on the LCD). This
Weather
Tendency icon
WWVB Tower Icon
(for time reception)
Time
Calendar
Weather Forecast
icon (Weather girl)
Indoor
Temperature
Outdoor
Temperature
Outdoor
Reception
Signal*
Number showing
Transmitter unit
Alarm icon
Moon phase
display
Sunrise/ sunset
display
Transmitter low
battery icon
Weather station low
battery icon
Relative
Humidity in %
Daylight
saving time
16
indicates whether the last reception was successful (“ON” icon) or not (“OFF” icon). If this
icon is blinking, the Temperature Station is currently receiving data.
Section 1 - TIME AND CALENDAR
Normal mode display of radio controlled time.
A reception tower symbol will be shown indicating that the WWVB time signal is
scanned for (flashing) or received (steady).
Note:
The symbol will not be shown when radio time reception is not successful or when time
reception function is turned off.
Display of "W date + month", "Second", "Alarm time" or "Date + month +
year"
In normal display, the alarm icon will be shown when the alarm is turned on. Or when
the snooze function is activated, the alarm icon will be flashing.
Section 2 - Moon phase and Sunrise / Sunset
Displays the sunrise, sunset, and sun duration time
Displays the 12 different moon phases.
