SW403 Manual
The alarm sound when the trigger, press any buttons except the “
” touch button or touch and hold the
“
” button for more than 3 seconds to stop the alarm signal.
Snooze function:
When the time is up to the alarm, touch and release the “
” touch button, the alarm signal stops, and
enter the snooze timing mode.
At the end of the snooze timer, it will ring again (can repeat snooze)
In snooze timing mode, press any buttons except the “
” touch button or touch hold down the “
”
touch button for more than 3 seconds to exit the snooze mode
Note:
The snooze time is five minutes
Maximum/Minimum Indoor Temperature/ Humidity
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the “ ” button:
Once to show the maximum indoor temperature and humidity values.
Twice to sow the minimum indoor temperature and humidity values.
Three times to return to the current indoor temperature and humidity levels.
To reset the maximum and minimum indoor temperature and humidity a, press and hold down the “ ”
button about 2 seconds. This will reset all minimum and maximum data recorded to the current displayed
values, contains outdoor temperature records.
F.Y.I.:
If the temperature reading is below
ranges
, the
LL.L
will be displayed. If the temperature reading is above
ranges
, the
HH.H
will be displayed.
The recording curve of temperature and humidity in the APP
TThrough the APP, you can view the historical changes of temperature|humidity of the weather station,
display it with a curve graph, click the "" icon on the main interface to enter, you can view the daily|monthly
change curve graph
Main interface daily graph monthly graph conversion channel
