3.
Press the SNOOZE key to enter the
Calendar setting
mode or wait for about 8 seconds for automatic
timeout.
Note:
The Projection clock will still try and receive the signal despite the time being manually set. When it
receives the signal, then the DCF tower icon will stay fixed on the LCD. If reception has been
unsuccessful, then the DCF tower icon will disappear but reception will still be attempted the following
hour.
CALENDAR SETTING
The date default of the Projection Alarm clock is MO 1.1. in the year 2000. Once the radio-controlled time
signals are received, the date is automatically updated. However, if the signals are not received, you can adjust
the date manually. To do this:
1.
The year digits start flashing. Use the MODE/MIN key to set the year (the range runs from 2000 to 2029).
2.
Press the SNOOZE key again to enter the month and date setting (flashing).
3.
Use the AL/HR key to set the
day
and the MODE/MIN key to set the
month
4.
Press the SNOOZE key again to enter the weekday setting (flashing).
5.
Use the MODE/MIN key to set the weekday.
6.
Press the SNOOZE key once more to confirm all settings and to exit or do not touch any buttons for
around 8 seconds. The mode will return to normal.
TIME ZONE SETTING:
To change to a different time zone (±9 hours):
1.
In normal mode display, press and hold down the MODE/MIN key to enter the time setting mode.
2.
Use the MODE/MIN key again to select the desired time zone. Each press changes the digits by 1 hour.
3.
When the desired time zone is selected, press the SNOOZE key to confirm and exit or wait for about 8
seconds for automatic return to the normal mode display.
Note:
If the time zone is changed to another time zone other than “0”, the calendar will not be displayed.
BACK-LIGHT:
The LED back-light is automatically switched ON when any keys are pressed. The back-light will be switched on
for approximately 2 seconds before automatically switching OFF.
However, if any of the keys are pressed and
held down, then LED back-light will remain ON constantly unit the key is released.
BATTERY CHANGE:
It is recommended to replace the batteries in the unit on an annual basis.
Please help in the preservation of the environment. Return used batteries to an authorised
depot.
SPECIFICATIONS:
Recommended operating temperatures
: 0°C to +49°C with 0.1ºC resolution
Power source
:
Batteries
: 2 x AA, IEC LR6, 1.5V
Central Europe = “0” hour
Time zone
