WI-FI WIND & WEATHER STATION
Page | 31
Mounting:
• Position in an open area that will have the least amount of interference with wind speed.
• Mount your sensor vertically with the wind cups on top.
• The maximum wireless transmission range to the station is up to 400 feet (121 metres) in
open air, not including walls or trees.
1. Use screws through the bottom of the mounting bracket to attach.
2. Insert bottom of pole into mounting bracket. Tighten knob to secure
3. Insert the included mounting pole into your sensor.
4. Tighten screws.
Alternatively:
1. Insert your own mounting pole (no more than 1 inch outside diameter) into the sensor.
2. Tighten screws
LTV-TH2 Thermo-Hygro Sensor
1. Install 2-AA batteries according to polarity and replace
battery cover.
Mounting:
1. Use the hole at the top to hang your sensor from the back
using a nail. Or, insert one mounting screw through the
front of your sensor.
2. Mount your sensor on a north-facing wall or in any shaded
area. Under an eave or deck rail is preferred.
3. The maximum wireless transmission range to the weather
station is up to 400 feet (121 metres) in open air, not
including walls or floors.
4. Be sure your sensor is mounted vertically, to allow
moisture to drain out properly.
Note:
Watch sensor mounting video:
LED Light
AA
+
-
AA
+
-
Battery Cover
Hole for
mounting
∙ Press TX to send a signal
∙ Press F/C to select Fahrenheit
or Celsius display on sensor.
