WI-FI WIND & WEATHER STATION
Page | 19
EXTRA SENSOR AREA
The Extra Sensor area of your station will show Relative Pressure when you first power up.
The Sensor Reception indicator will display when additional sensors are connected.
Note:
On power up the station will search for any additional sensors.
Optional Extra Sensors: Up to 4 additional Thermo-Hygro, Wind Speed, Rain, Water Leak or
any combination of these sensors can read to the EXTRA SENSOR area of your display.
Simply press and release the EXTRA button to view these sensors or turn on Auto Scroll.
Note:
Not all sensors will read to the station. Be sure to check the website to see if a sensor
can read to the app only, or both station and app.
Relative Pressure (default)
Temperature/Humidity
24 Hr Rain
Water Leak
Contact Probe
Probe
Reading
PRESSURE
INH G
Auto Scroll all Extra Sensors
EXTRA SENSOR
EXTRA SENSOR
24 HR
EXTRA SENSOR
EXTRA SENSOR
Add Extra Sensors to your station:
1. Hold the EXTRA button 3 seconds, to add a sensor to the station.
2. Install batteries in the sensor, and if the sensor has a TX button, press the TX button to
force a signal.
3. Allow up to 3 minutes to view sensor and ID on station.
Note:
Once sensor is found the search will stop. Sensor, ID, and type will show for 3
seconds then return to normal display.
4. Scan sensor bar code ID so it will read in the La Crosse View app.
5. Added sensors will be available for display in Extra Sensor area of station.
