Model: 308-2316 www.lacrossetechnology.com/support
Page | 9
12/24 Hour Time Format
7.
12H
will flash and the letters
HUR
will show in the upper right corner.
8.
Press + or MIN/MAX button to select either 12 hour (AM/PM) or 24 hour time
(24:00) format.
9.
Press the SET button to confirm selection and move to time settings.
Time Settings
10.The
hour
will flash. Press + or MIN/MAX button to select the correct hour.
11.Press the SET button to confirm selection and move to the minutes.
12.The
minutes
will flash. Press + or MIN/MAX button to select the correct minute.
13.Press the SET button to confirm selection and move to calendar settings.
Calendar Settings
14.The
year
will flash. Press + or MIN/MAX button to select the correct year. Press the
SET button to confirm year selection and move to the month.
15.The
month
will flash. Press + or MIN/MAX button to select the correct month. Press
the SET button to confirm selection and move to the date.
16.The numeric
date
will flash. Press + or MIN/MAX button to select the correct date.
Press the SET button to confirm selection and move to the date format.
17.Press the SET button to confirm selection and select Fahrenheit or Celsius temperature units.
Temperature Units: Fahrenheit or Celsius
18.The indoor and outdoor temperature will flash together.
19.Press + or MIN/MAX button to choose
Fahrenheit
or
Celsius
temperature display.
20.Press the SET button to confirm selection and move to air pressure units.
Barometric Air Pressure Units: InHg or hPa
21.The pressure number and
InHg
(Inches of Mercury) will flash together.
22.Press + or MIN/MAX button if you wish to switch between InHg and hPa (Hecto
Pascal) for your pressure reading.
23.Press the SET button to confirm selection and move to relative air pressure number.
Relative Air Pressure Number
Set the relative pressure number to a local reporting station or Internet reading for
your location.
24.The
relative pressure number
will flash.
25.Press + or MIN/MAX button to adjust your relative pressure.
26.Press the SET button to confirm selection and move to relative air pressure sensitivity
setting.