L3Harris Narda SignalShark, Руководство пользователя

Страница: 201 / 231

Managing Data
201
Directory
Opens a dropdown menu to select a directory.
You may directly tap on a directory to select it.
Double tap on the Data folder to show lower level folders (if created).
Content Tab
Opens a dropdown menu to select a sub menu in the Data Logger menu.
You may directly tap on one of the tabs to select it instead.
Data Set
Opens a dropdown menu to select an entry from the active folder (see
Set_Active_Saving_Directory ).
Recall
Recalls the results from the selected data set.
Recall as Setup
Recalls the selected data set as the current setup.
Delete
Deletes the selected (highlighted) entry.
To delete several selected entries, see Organize Data Logger > Delete.
Configure Save
In this menu you can configure how the name is built and which tasks are saved when saving
a data set.
For further information see Configure Save .
Selecting a directory
To select a directory:
You selected the Data Logger view.
1. Tap the Organize Data Logger button.
The
Organize Data Logger
menu opens.
2. Tap the Directory button.
The
Directory
dropdown list opens.
Select a directory and close the dropdown list using the x button.
Selecting a content tab
To select a content tab:
You selected the Data Logger view.
1. Tap the Organize Data Logger button.
The Organize Data Logger menu opens.