COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 301
Apr. 14/16
Disassembly
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
DISASSEMBLY
1.
GENERAL
This section contains the information required to disassemble the Model FA2100 Cockpit
Voice Recorder (FA2100CVR). Access to the major assemblies within the Model
FA2100CVR is described such that there is minimal disturbance to other assemblies. Ex-
treme care should be exercised when removing these assemblies. To ensure the warran-
ty coverage of a defective circuit board, it must be returned to the factory for repair or re-
placement.
CAUTION: THE MODEL FA2100’s PRINTED CIRCUIT ASSEMBLIES CONTAIN DE-
VICES SENSITIVE TO ELECTROSTATIC DISCHARGE (ESD). PERSON-
NEL HANDLING A PRINTED CIRCUIT BOARD SHOULD COMPLY WITH
PROPER ESD HANDLING PROCEDURES; FAILURE TO DO SO MAY RE-
SULT IN DAMAGE TO THE ESD SENSITIVE DEVICES RENDERING THE
PRINTED CIRCUIT BOARD USELESS. PRIOR TO HANDLING A
PRINTED CIRCUIT BOARD, ENSURE PROPER PERSONNEL GROUND-
ING TECHNIQUES ARE USED. ALSO, ENSURE THAT ALL CIRCUIT
BOARDS ARE PLACED INTO STATIC SHIELDING CONDUCTIVE BAGS
WHEN HANDLING OR STORING.
SYMBOL FOR ESD
GROUND
CONNECTING
O
ESD
WARNING
SYMBOL
2.
MODEL FA2100CVR DISASSEMBLY INSTRUCTIONS
Special tools, fixtures, and equipment that are needed to disassemble and repair the
Model FA2100CVR are listed in Figure 901.
NOTE:
Numbers shown in parentheses in the following text and figures are
the Illustrated Parts List (IPL) figure number followed by the IPL item
number for a particular part; e.g., (1-100) for IPL Figure 1, Item 100.
For items listed in the parts list but not illustrated, the item number is
preceded by a “-”.
In addition to the IPL figure references, each disassembly instruction is accompanied with
an illustration showing specific assemblies or subassemblies to which the steps of the
procedure are related. The figures in this section contain the same figure/item number ref-
erences identifying the piece parts of the assembly as in the IPL figures; however, differ-
ent views of the assemblies may be provided to facilitate disassembly tasks.
The document reference is online, please check the correspondence between the online documentation and the printed version.
