Emergency Lights or Siren Activated Version
TB-100 Bluetooth Transmitter Installation Guide
L3 Mobile-Vision
10.29.2018
P a g e 5
Emergency Lights or Siren Activated Version
Mount the Bluetooth Transmitter
Begin by selecting a location that is:
On a flat surface in the trunk or cabin
Within 4 feet of the antenna and 10 feet of the Flashback DVR, and
Away from possible spills.
Mount the Bluetooth Transmitter (ZAS-TM010001) to the surface using the self-tapping
screws.
Mount the antenna
Begin by selecting a location that is within 4 feet of the Bluetooth Transmitter, such as on
the vehicle’s back deck, cage wall, or A-pillar. Next, mount the antenna (ZAN-001-0001)
using the provided bracket hardware (ZMC-TM010002).
Connect the antenna cable (ZCA-C22021-6) to the antenna (ZAN-001-0001).
Connect the other end of the antenna cable (ZCA-C22021-6) to the Bluetooth
Transmitter.
Plug the Signal & Power cable (ZCA-TM010001) into the POWER/SIGNAL port on the
back of the Bluetooth Transmitter
.
Make the wiring connections
.
Wire
Color
Connect to…
TRIGGER IN 2
Blue
Emergency lights or siren
GROUND
Black
Chassis ground
12V BATTERY
Red
To 2-amp fuse, then to battery positive
IGNITION
White
To 2-amp fuse, then to vehicle ignition sense
TRIGGER IN 1
Green
Emergency lights or siren
(Continued)
2
5
1
3
4
6
