L3 comminications SERIES 5000, Руководство по эксплуатации и обслуживанию

Страница: 116 / 283

Survey Routes
4-57
The following buttons in the Survey Route dialog box are used to set up, save and
restore the survey route:
Save Survey.
Click this button to save the survey route.
Restore Survey.
Click this button to restore the survey route.
Set Origin Lat/Lon.
Click this button to open the Origin Location dialog box
which allows you to enter the latitude and longitude manually.
Use Current Trackpoint.
Click this button to start the survey route at the
current navigation trackpoint location.
Move Origin.
Click this button to quickly move the placed survey route on the
chart in the Navigation window. Click the button, and then move the cursor
over the Navigation window. The cursor will change to a
. Click in the
window to move the route to the new starting point.
Undo.
Click this button to undo an operation.
Edit Waypoint Lat/Lons.
Click this button to open the Text window shown in
Figure 4-68 on page 4-55 with the waypoint information listed. This is the
information that is saved when clicking
Save Survey
and can be printed and
used as a reference at a later date if the survey needs to be repeated. You can
edit this file in the Text window if you want, and when you save the file, the
changes will be reflected in the Navigation window when you click
Restore
Survey
and open the file from the Open dialog box.
Insert New Line.
Click this button to insert a line. Click the button, and then
click in the Navigation window to insert the first waypoint, which is the
beginning of the line. Click again in the window to insert the second waypoint,
which is the end of the line. Continue clicking to add additional lines. When
you are finished, click
End Line Insertion
, which was previously the
Insert
New Line
button. You can also end the line insertion by clicking any other
button or by right-clicking in the Navigation window.
Insert Waypoint.
Click this button to insert a waypoint into an existing line.
Click the button, and then click in the line where you want to insert the
waypoint. The waypoint is inserted. The line will turn red when it is directly
under the pointer. If you hold the mouse button down when inserting the
waypoint, you can drag the newly inserted waypoint to a different location.
You can continue to click in the Navigation window to insert additional
waypoints, on the same or on a different line.
Append Waypoint.
Click this button to append a waypoint to the end of a
line. Click the button, and then click the line near the end that you want to
append the waypoint to. Click again in the Navigation window where you want
to insert the new waypoint. Continue clicking to append additional waypoints.
When you are finished, click
End Append
, which was previously the
Append