L.T. Rich Products Z-Spray JR36R, Руководство пользователя

Страница: 7 / 27

Periodically tighten all nuts, bolts and screws and check that all fasteners are properly
installed to ensure that the Z-Spray is in safe operating condition.
Never perform maintenance on the Z-Spray while parking brake is disengaged.
2.5 Storage Safety Rules
Never store the Z-Spray in any area accessible by children.
Never store the Z-Spray with fuel in the tank inside a building where fumes could reach
an open flame or spark.
Allow the Z-Spray engine to cool before storing in an enclosed area.
Lubricate all moving parts of the Z-Spray to prevent rust during storage.
Remove all accumulated debris from the Z-Spray and attachments before storing.
SECTION 3 MAINTENANCE
3.1 Engine Maintenance (9.5 HP to 13 HP electric and pull start engine)
**USE COMPRESSED AIR (NOT WATER) WHEN CLEANING ENGINE**
Use only original equipment replacement parts. Other parts may not perform as
well, may damage unit, and may result in injury (Engine Manual)
Oil Recommendations: Manufacturer recommends the use of certified oils for best
performance. Use 4-Stroke automotive detergent oil of API service class SE or higher
grade
Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to
select the best viscosity for the outdoor temperature range expected.
If the oil level is below the ADD mark, add oil until it reaches the FULL mark. Start the
engine and check for proper pressure before continuing to operate.
(oil drain hose located on left side) (pull drain plug to side of frame)
Fuel Recommendations: Fuel must meet these requirements

Clean, fresh, unleaded gasoline.

A minimum of 87 octane/87 AKI (91 RON).

DO NOT FILL above the top of the fuel filter screen or the fuel may overflow
when it heats up later and expands
Full Maintenance Information Can Be Located In the Engine Manual Provided
Page 4