Trouble-shooting Guide
1
2
3
Problem
Check
Action
4
1. Replace for new five-pin-line or
heating element .
2. Reconnect five-pin-line.
3. Refer to “Replacing Heating
Element and Tip ”.
The LED indicator
is not lit up
Is the power line loose?
Reconnect it.
1. Is the soldering iron
cord broken?
2. Is five-pin-line of tip well
connected?
3. Is heating element broken?
Tip can't heat up
The tip is not wet
1. Is the tip temperature
too high?
2. Is the tip clean?
1. Set an appropriate temperature.
2. Refer to “Care and Maintenance
of Tips” .
The tip temperat-
ure is too high or
too low
1. Is the tip temperature
calibrated correctly?
2. Is the tip deformed or heavily
eroded?
1. Refer to “Temperature
Calibration”.
2. Replace a new tip.
Note: *If any problem happened not listed as above turn off the power switch.
Wait for a minute and turn on the power switch again, if this operation does
no help please contact the service agent or send it back to manufacturer.
11
!
Quality Warranty will be not available if we find this unit is modified or repaired by
yourself, and each unit has its individual code on the label, do not remove or modify
this code so as to guarantee your benefit.
WARNING:
Replace Tip
!
1) When seeking tip replacement, please select original one of our company. The tip made by
another manufacturer may affect soldering performance or damage Heating Element even
Control System.
2) We take no responsibility for any problem caused by using the tip made by an other manufacturer.
CAUTION:
Содержание Solderite SGS-2005L
Страница 1: ...SGS 2005L SGS 2015L Lead free soldering system User s Manual ...
Страница 15: ...Tip outside diameter 6 5mm 14 Chart of Tip Shape and Size ...
Страница 16: ......