2
FT-80W
User Manual
1
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
power button
Nixie tube display
Indicate light for temperature unit
Soldering wire holder
Temperature adjustable
knob button
Tip cleaner location
Item No.
Voltage
Power
Temperature
Adjustable
unit
Display method
Temperature
Temperature
FT-80W
110/240V AC
80W
Knob
80°C~480°C
Nixie tube
°C/°F
2℃
±
±15
℃
1
.
power button
Turn on after this device given by power. Set the temperature you want will be shown
on the nixie tube display by knob. It will show the real temperature value of the
soldering tip after 3 seconds.
2
.
Temperature Setting
When this device is working, it can adjust temperature rapidly by temperature knob,
the setting temperature will be shown when adjusting temperature, the real
temperature of soldering tip will be displayed after stopped adjusting temperature
for 3 seconds. Temperature range is 80~480℃.
setting
temperature
actual-measured
temperature
Up to be setting
temperature
3
4
The design of this product(including internal software) and its accessories is under
the protection of relevant state laws.Any violation of the relevant rights of our
company will be subject to legal sanctions.Users shall consciously abide by the
relevant state laws when using this products.
Copyright information
We will take no responsibility for any personal injury or property damage
caused by reasons other than the product quality problem,which may include
force majeure (natural disasters,etc) or personal behavior during the
operation of this product.This manual is organized ,compiled and released
by
SHENZHEN FAST TO BUY COMMERCE CO.,LTD
. according to the latest product
features. We will not responsible for further notice of the subsequent
improvement of the product and this manual.
Disclaimer
The soldering iron needs to be tested before it leaves the factory,
so the soldering tip may cover a small amount of tin, and the
casing will be slightly yellowing, which is a normal phenomenon.
Soldering Station
Users are required to have basic knowledge of common sense and electrical
operations before using the product. Minors shall use the product under the
guidance of a professional or guardian.
3.Essential knowledge for users
Packing list
To avoid electric shock or injury to the human body or fire hazard,the follwing basic rules
must be observed when using the equipment.In order to ensure personal safety,only parts
and accessories approved or recommended by the original factory canbe used, otherwise
serious consequences may occur!
Misuse of this product may lead to serious injury to the user or material
damage to the object involved.
Caution
Essential knowledge for users
Safety precautions
WARNING
So Users shall strictly observe the following rules:
Keep this product away from flammable materials.
Keep the product out of children’s reach.
Do not use this product if you are inexperienced or have no sufficient necessary
knowledge without the guidance of related personnel.
Do not use this product under wet environment or with wet hands to avoid electric
shock.
Do not modify this product and its accessories without authorization.
Please turn off the power when replacing parts and iron tips, and not resume the use
until the equipment is completely cooled down.
Please use the accessories from the original factory when replacing the product parts.
Make sure to turn off the power switch when the equipment is temporarily stopped or
out of use.
· The handle structure is ergonomically designed for comfortable grip.
· The heating wire and sensor are made of PTC material, which is quick in
temperature rise and precise in temperature control.
· Auto-standby, auto-shut down is available.
· Using 3 cored power cable.
Features
·
This product designed with nixie tube display.
· MCU controlled temperature calibration with PID system equipped, adjust
temperature by knob button, easy to operate.
· Combined soldering station with soldering stand.
Main unit (including machine, power cable and handle)x
1
pc
Soldering tips
x
5pcs
Soldering wire holder x
1
pc
User manual x
1
pc
Tin suction x 1PCS
50g lead-free wire x 1PCS
Elbow tweezers x 1PCS
Specification
Appearance and control panel
Operational guide
Temperature
unit
switch
/
temperature
lock
Soldering
handle
Soldering
stand
Soldering
tip
slot
Temperature
method
stability
range
accuracy
