www.lk-ind.com & 713-926-2623
Page. 6
Getting Started
Specifications
Equipment Ratings
• Line input: 120/240 VAC, 700W, 50/60 Hz, 1Ø
• Maximum Temperature: Maximum of 212°F (100°C)
• Current Protection: 20-AMP fuse/circuit breaker
Environmental Ratings
• Indoor use only
• Altitude: 0-2000 meters
• Humidity Range: 80% RH max.
• Pollution Degree 2
Applicable Testing Standards
• ASTM D4007 (API MPMS Ch. 10.3): Standard Test Method for Water and Sediment in Crude Oil by
the Centrifuge Method (Laboratory Procedure
• ASTM D91: Standard Test Method for Precipitation Number of Lubricating Oils
• API MPMS Ch. 10.4 (withdrawn ASTM D96): Determination of Sediment and Water in Crude Oil by
the Centrifuge Method (Field Procedure)
• ASTM D1796: Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method
(Laboratory Procedure)
• ASTM D2273: Standard Test Method for Trace Sediment in Lubricating Oils
• ASTM D2709: Standard Test Method for Water and Sediment in Middle Distillate Fuels by
Centrifuge
• ASTM D893: Standard Test Method for Insolubles in Used Lubricating Oils
Applicable Safety Standards
• UL 61010-1 Issued: 2012/05/11 Ed: 3 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 1: General Requirements
• CAN/CSA-C22.2 No. 61010-1 Issued: 2012/05/11 Ed: 3 Safety Requirements for Electrical
Equipmentfor Measurement, Control, and Laboratory Use Part 1: General Requirements
• ISA 12.12.01 Issued: 2015/08/21 Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
• CSA C22.2#213 Issued: 2015/08/21 Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
• UL 823 Issue:2006/10/20 Ed:9 Rev:2012/01/31 Electric Heaters for Use in Hazardous (Classified)
Locations
NOTE:
See the Operation section to learn more about high temperature protection.