![background image](http://html2.mh-extra.com/html/l-b-white/i17/i17_owners-manual-and-installation-instructions_3189655014.webp)
Service Instructions
1. Disconnect the gas supply to heater before
attempting to service unless it is necessary to have it
connected for your service procedure. Use special
care to avoid being burned by hot surfaces or make
sure the heater is cool to touch before servicing.
2. Do not attempt to repair any part that comes in
contact with the gas such as the hose and
combustion cones, etc. Replace them.
3. Do not attempt to disassemble or repair any of the
following parts: valves of any kind, regulators,
thermostats, electronic devices, switches, safety
devices, hose assemblies, etc. Replace them.
4. After any repairs are made, always restart the heater
to make sure it operates properly. Refer to “Start Up
Instructions” within this Owner’s Manual.
5. For help in servicing this heater see the Trouble-
shooting Guide within this Owner’s Manual or call the
manufacturer. Some of the manufacturers of
components parts will provide additional information
on their products. Consult these materials if
applicable.
NOTE: The sshroud aand ccombustion ccones ttypically ddo nnot
require rremoval ffrom tthe hheater aassembly. O
Other
basic ccomponents oof tthe hheater aare eeasily sserviced
by ffollowing tthese pprocedures.
GENERAL
13
1. Have your gas supplier check all gas piping annually
for leaks or restrictions in gas lines. Also, at this time
have your gas supplier clean out the sediment trap on
the zone control panel of any debris that may have
accumulated.
2. The aappliance aarea sshall bbe kkept cclear aand ffree ffrom
combustible m
materials, ggasoline, aand oother
flammable vvapors aand lliquids.
3. Regulators can wear out and function improperly.
Have your gas supplier check the date codes on all
regulators installed and check delivery pressures to
the appliance to make sure that the regulator is
suitable for continued use.
4. Regulators must be periodically inspected to make
sure the regulator vents are not blocked. Debris,
insects, insect nests, snow, or ice on a regulator can
block vents and cause excess pressure at the
appliance.
5. For safety as well as for optimum performance at the
heater, it is necessary to keep the inside and the
outside of the heater free of dust, dirt or any
combustible material. If any operational component
shows signs of rust or corrosion, replace the
component immediately.
6. If any warning or instruction labels, dataplates, etc.
become lost or hard to read, replace them
immediately. Do not operate the heater until you
have all instructions and can read and understand
them.
7. Check overall condition of heater for cracked or
damaged components, loose screws or bolts, etc.
Replace any suspect components.
8. Check all hose and tubing assemblies for cracks,
abrasions or ruptures. Replace any hoses that are
suspect.
IMPORTANT
If it becomes apparent that a dark spot has formed part way
up on the inner combustion cone or a build up of debris is
occurring in the bottom of the inner cone, it will be
necessary to clean out the combustion cone assembly.
Refer to “Cleaning Instructions”.
Maintenance Instructions
Содержание I17
Страница 2: ......