I-3 Radiant Heater
Owner’s Manual • I-3
13
FIG. 8
Safety Chain
(part 500-26771)
The safety chain hanging kit must be installed. Its
purpose is to provide a safety in the event the heater
is accidentally detached from its mounting on the crate
panel. It alsoprovides a means to hang the heater out of
the way during room depopulation and cleaning.
1. Connect key ring to toggle bolt, and safety latch and
chain to key ring. See Fig. 9.
2. Drill a 5/8 in. diameter hole into the ceiling directly
above the heater and secure the toggle bolt with
hardware in place. See Fig. 9.
FIG. 9
3. Connect opposite end of chain to key ring on heater
mounting frame. Take up any slack, and cut off
excess chain.
4. When cleaning the room or depopulating, detach the
heater’s safety pin and connect the heater’s key ring
to the snap latch at the toggle bolt. See Fig.10
FIG. 10
