L.B. White CR125AZPA220206, Инструкция и руководство пользователя

Страница: 11 / 42

11
1. The area surrounding the heater shall be kept clear
and free from combustible materials, gasoline, and
other flammable vapors and liquids.
2. The regulator must be periodically inspected to make
sure its vent is not blocked. Debris, insects, insect
nests, snow, or ice on a regulator can block vents
and cause excess pressure at the heater.
3. A regulator can wear out and function improperly.
Have your gas supplier check delivery pressures to
the appliance to make sure that the regulator is
reliable.
4. Check any heater wiring for corrosion, frayed or cut
insulation, tight connections, etc. Repair or replace
as necessary.
5. Review the heater’s instruction label at the time of
maintenance for legibility. Make sure it is not cut,
torn, or otherwise damaged. Any damaged label
must be replaced immediately by contacting the L.B.
White Co., Inc.
6. Ensure the gas hose does not have any nicks, or
cuts, and its connections are not corroded, or have
stripped threads. Replace the gas hose assembly if
necessary. Do not repair.
■
Before each use give the heater a general cleaning.
WARNING
Do not use water or liquid cleaning solution when
cleaning. Use of water, or liquid cleaning solution on the
control components can cause severe personal injury or
property damage due to water and/or liquids:
* On gas control valves causing corrosion which can
result in gas leaks and fire or explosion from the
leak.
Clean the heater with pressurized air, a dry brush, or a
dry cloth.
Cleaning Instructions
Maintenance Instructions
WARNING
Fire, Burn, and Explosion Hazard
■
This heater contains mechanical components used in the gas management and safety systems.
■
Such components may become inoperative or fail due to dust, dirt, wear or aging.
■
Periodic cleaning and inspection as well as proper maintenance are essential to avoid serious injury or damage.
■
Allow the heater to cool completely before cleaning or maintenance.