w w w . l - a c o u s t i c s . c o m
ADDITIONAL INSTRUCTIONS
1.
Read this document
2.
Heed all SAFETY INSTRUCTIONS as well as DANGER and OBLIGATION warnings
3.
Never incorporate equipment or accessories not approved by L-ACOUSTICS
®
4.
Beware of sound levels
Do not stay within close proximity of loudspeakers in operation and consider wearing earplugs.
Loudspeaker systems are capable of producing very high sound pressure levels (SPL) which can instantaneously
lead to permanent hearing damage to performers, production crew and audience members. Hearing damage can
also occur with prolonged exposure to sound: 8 h at 90 dB(A), 30 min at 110 dB(A), less than 4 min at 130 dB(A).
5.
Read the USER MANUAL before operating the system
Use the loudspeaker system components described in the user manual and follow the operating instructions
6.
Read the RIGGING MANUAL before installing the system
Use the rigging accessories described in the rigging manual and follow the associated procedures
7.
Read the MAINTENANCE section of this document before servicing the product
8.
Do not expose the product to extreme conditions
Do not expose the product to rain or sea spray
Do not expose the product to moisture (mist, steam, humidity, condensation…) or excessive heat (direct sun,
radiator…) for a long period of time
9.
Do not store the product on an unstable cart, stand, tripod, bracket, or table
10.
Maintain this document as an integral part of the product
Keep this document in a safe place
Write down any service to the product in the MAINTENANCE section of this document
Do not resell the product without this updated document
SYMBOLS
The following symbols are used in this document:
DANGER
The DANGER symbol indicates a potential risk of harm to an individual or damage to the product.
This symbol can also notify the user about instructions that must be strictly followed to ensure safe installation
or operation of the product.
OBLIGATION
The OBLIGATION symbol notifies the user about instructions that must be strictly followed to ensure proper
installation or operation of the product.
WELCOME TO L-ACOUSTICS
®
Thank you for purchasing the L-ACOUSTICS
®
SB15P. The shipping carton should contain:
-
1 SB15P enclosure, 1 power cord (110V US or 220V EU) and 1 ferrite electro-magnetic interference filter.
Each L-ACOUSTICS
®
product is tested and inspected before leaving the factory and should arrive in perfect condition.
After the careful opening of the shipping carton, check for any noticeable damage. If so, notify the shipping company or
the distributor immediately. Only the consignee may initiate a claim with the carrier for damage incurred during
shipping. Be sure to save the carton and packing materials to be inspected by the carrier.
Carefully read this document in order to become familiar with the product and to identify the external documents
containing essential information on installing and operating the product properly and safely. All the documents
mentioned hereafter are freely available on the L-ACOUSTICS
®
web site:
As part of a continuous evolution of techniques and standards, L-ACOUSTICS
®
reserves the right to
change the specifications of its products and the content of its documents without prior notice. Please visit
the L-ACOUSTICS
®
web site on a regular basis to download latest updates for documents and software.
Содержание SB15P
Страница 1: ...SB15P product information ...
