Operation
Operation
Powering on/off
The POWER button is located on the front panel. Press the POWER button for two seconds to power on/off the processor.
A number of LEDs ash in orange during the start-up sequence, depending on the license level activated on the
processor:
• 1 LED: Live 16
• 2 LEDs: Live 32
• 3 LEDs: Live 64
• 4 LEDs: Live 128
If the start-up sequence fails, the SYNC, WORD, IN, and OUT LEDs ash in red.
The POWER LED is lit in:
• green when the processor is powered by both power supplies.
• orange when the processor is powered by only one power supply.
All LEDs ash in orange when identifying the device via an AVDECC controller.
During a rmware update, the LEDs display an orange chase pattern. If the update fails, all LEDs ash in red.
Front panel LEDs
CONTROL
The CONTROL LED is lit in green when L-ISA Processor II is connected to L-ISA Controller.
24
L-ISA Processor II owner's manual (EN) version 1.0