Installation
Installation
Mounting
The L-ISA Processor II is three rack units high (3U) and can be mounted in an EIA-standard 19” rack using the four points
on the front panel. Use the xing material provided by the rack manufacturer to mount L-ISA Processor II to the rack front
rails.
L-ISA Processor II dimensions
483 mm / 19 in
458 mm / 18 in
465 mm / 18.3 in
433 mm / 17 in
133.35 mm / 5.25 in
121 mm / 4.7 in
24.3 mm / 1 in
Risk of damaging L-ISA Processor II
L-ISA Processor II should be rear supported in addition to the front panel mounting.
Use the rear brackets provided with L-ISA Processor II.
Any mechanical damage to L-ISA Processor II used without rear support is not covered by warranty.
L-ISA Processor II with rear rack support brackets
m
ax
. 5
15
m
m
/ 2
0.
3
in
18
L-ISA Processor II owner's manual (EN) version 1.0
