L.A. Spas IN-FIT, Руководство пользователя

Страница: 18 / 30

17
rev. 2011-5-26
increments of 5 minutes. Press the Mode/Prog key to accept the minute setting and proceed to
programming the filter 2 start time.
4. Filter 2 Start Time:
After setting the end time of the first filter cycle, the control panel will display
SET FILTER 2
and a
flashing “START TIME” icon. Press the Warm or Cool key to adjust the hour setting. Program
default setting is 12AM. Press the Mode/Prog key to accept the hour setting and proceed to
program the minute setting. Press the Warm or Cool key to adjust the minute setting in
increments of 5 minutes. Press the Mode/Prog key to accept the minute setting and proceed to
programming the filter 2 end time.
5. Filter 2 End Time:
After setting the start time of the second filter cycle, the control panel will display
SET FILTER 2
and
a flashing “END TIME” icon. Press the Warm or Cool key to adjust the hour setting. Program
default setting is 2AM. Press the Mode/Prog key to accept the hour setting and proceed to
program the minute setting. Press the Warm or Cool key to adjust the minute setting in
increments of 5 minutes. Press the Mode/Prog key to accept the minute setting and exit the
programming mode.
STANDBY MODE
Standby mode is helpful when changing a filter. Press
Warm or Cool key, then Swim 2 key will turn off
all spa functions temporarily. Press any key to reset the spa.
CONTROL PANEL LOCK
Press the
Time , Spa Jets , then Warm keys within 3 seconds. When locked, the PL indicator light will
come on. All keys on the control panel will be disabled except for the Time key. To unlock the control
panel, press the Time , Spa Jets , then Cool keys.
TEMPERATURE LOCK
Press the
Warm or Cool key, then the Time , Spa Jets , and Warm keys within 3 seconds to activate the
set temperature lock. The TL indicator light will come on. To unlock the set temperature, press the
Warm or Cool key, then the Time , Spa Jets , and Cool keys.
FEATURE OPERATIONS
JET SELECTOR VALVE (DIVERTER VALVE)
Your spa may be equipped with a jet selector valve (diverter valve). This valve can be used to divert jet
power from one area in the spa to another area. This valve is fully adjustable and can be used to suit
the user’s desired effect. The valve may be slightly harder to turn when the jet pump is on high speed.
This is normal due to high rate of water flow and pressure present in the valve.
AIR CONTROL VALVES
Your spa may be equipped with air controls. The air control is an on/off valve that allows air to be
introduced into a specific jet configuration resulting in a more vigorous jet action. Turn the valve handle
clockwise to turn the air on, and counterclockwise to turn the air off. Opening the valve increases jet
pressure and closing the valve decreases the jet pressure.