ESI-500
Pilot’s Guide
3-14
Display Features
Figure 3-12: GPS Display Features
Selected Course
Selected Course is used for VOR/ILS and GPS navigation. It is
located in the lower right corner of the attitude display area, above
the direction display. The digits are preceded by the ‘CRS’ indicator.
For VOR navigation, the selected course is changed to the current
VOR Omnibearing when the CRS Direct To function is activated in the
Pilot menu.
Selected Course is set via the Set Course pilot menu for VOR/LOC/
BC/ILS operation, but set by the GPS for GPS operation.
For Localizer and ILS navigation, the selected course should be set
to the appropriate inbound course for the approach to the runway.
(E.g., For a non-backcourse approach, if the inbound course for the
approach to runway 27 is 270°, then the selected course should be
set to 270°.)
The Selected Course affects only the Navigation
display on the ESI-500, and does not control the
NAV receiver’s OBS value (which is set from the
CDI or HSI).
Because the Selected Course affects the VOR
deviations, the TO/FROM flag, and the BC indications
on the ESI-500, each time the NAV receiver’s OBS
value is changed, the Selected Course should be
updated to match to avoid conflicting navigation
displays.
CAUTION
Содержание ESI-500
