Multi-Image Splicing Processor
10
Save Setting
Save Mode 1
Device Mode
Image Layout
Current mode does
not exist!
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
connection of computer DVI interface with “S1-DVI” port of the back device, just
click “S1” in the front which means choosing the signal to display on the screen.
Step 4:
After selecting signal and normal display of large screen, save all setting
data. Click “MENU” to enter into main menu interface, and then get into “Save
setting” interface to select “Mode 1” and click “OK”. Things will be fine when it
suggests saving successfully.
Note: Mode 1 is default startup data of device boot; it’s suggested that the most
common mode should be saved to Mode 1 and the device can save 32 kinds of modes
at most.
Case 2: Screen size is 1792×1344 and loaded transmitting card is shown as
picture below:
Requirement: 1) Whole computer desktop should be displayed completely.
2) Screen is divided into three parts with proportion of 1:2:1.
1792
Diagram of loaded transmitting card
704
640
