Multi-Image Splicing Processor
9
Screen Parameters
OUT1
OUT2
Select by finger key
Horizontal Size:
1920
Vertical
Size:
1080
Turn knob to select
output
Confirm
Cancel
×1
×10
×100
Device
M
ode
OUT2
Copy Output
Horizontal
Mosaic
Vertical
Mosaic
OUT1
Note:
All output interfaces are
combined horizontally.
Debugging Procedure:
Step 1:
click “MENU” and enter into main menu interface to select “Horizontal
mosaic” of the first item “Device mode”.
Note: as two transmitting cards are in the 1x2 arrangement, horizontal mosaics
are needed then.
Step 2:
Click “OK” to return to main menu interface; select “Large screen
parameters” to set size of each output interface.
Note: Input according to corresponding transmitting card size of each output
interface. For OUT1, its horizontal size is 960 and vertical size 896; for OUT2, they
are 1216 and 896 respectively.
Step 3:
After inputting, select “Confirm” and return to main menu interface. The
large screen splicing is finished, select signal source needed to display on screen and
click corresponding key. E.g.: for display of computer signal on large screen and
